Chrome And Metal Ceramic Coating 50ml Tonyin Premium Detailing Tg

Highlights:

• Permanent Protection: Shields surfaces from oxidation, rust, and corrosion caused by road salt, moisture, and UV rays.
• Mirror-Like Finish: Restores and maintains a deep, reflective gloss that resists dulling over time.
• Self-Cleaning Technology: The hydrophobic (water-repellent) properties cause water to bead off and prevent dirt or brake dust from sticking.
• Multi-Surface Use: Safe and effective for chrome trims, aluminum wheels, stainless steel exhaust tips, and engine components.
• Stain Resistance: Helps prevent unsightly fingerprints, water spotting, and chemical etching.

Application:

1. Thoroughly wash and dry the metal.
2. Use a metal polish to remove any existing oxidation or swirl marks.
3. Wipe the area with an alcohol-based surface prep to ensure it is 100 free of oils or polish residue.
4. Apply a few drops of the coating onto a microfiber suede cloth wrapped around an applicator block.
5. Wipe the product onto the metal in a consistent, overlapping cross-hatch pattern (horizontal then vertical) to ensure full coverage.
6. Wait for the coating to flash or haze (usually 20 seconds to 2 minutes depending on temperature).
7. Gently buff away the residue with a clean, high-quality microfiber towel until the surface is clear.
8. Keep the treated surface dry and away from water for at least 1224 hours.
9. Full chemical curing typically takes 7 days; avoid harsh detergents during this period.