For hydraulic brake and clutch systems.
Colour- Pale Amber
Shelf life from production- 36 Month
Min. wet boiling point- 165 -deg-C
Min. dry boiling point- 260 -deg-C
Density conditions- at 20-deg-C
pH value- 7-11
Meets and exceeds the current international specifications of U.S. FMVSS No. 16 DOT 4, SAE J1703 and ISO 4925 (Class 3)
Suitable for use in passenger cars, commercial vehicles and motorcycles with hydraulic brake systems and clutch systems- recommended where a non-petroleum-based medium has to be used. Not suitable for vehicles with mineral oil-based systems (e.g. certain Citroen models). If in doubt, consult the vehicle manual.
Min. dry boiling point 260-deg-C. Min. wet boiling point 165-deg-C
Notice-
Keep brake fluid clean and dry. Contamination by dirt, water, petroleum products or other materials can lead to brake failure or costly repairs.
Store brake fluid only in its original container. Keep the container clean and tightly closed to prevent the accumulation of water. Do not refill the container and do not use it to store any other liquids. Dispose of used brake fluid responsibly (EU waste code 160113). Brake fluid damages paintwork -ndash- if spilled, wash off immediately using plenty of water. When using W-uuml-rth 5-litre brake fluids, pierce the centre of the foil seal and screw on the tap. Do not attempt to remove the foil seal, as this will prevent the tap from being properly sealed.
DOT 4 Dispensing tap for 5 l Art No. 0891423005. (pierce the centre of the foil to insert, removing the foil will cause leakage)
Art. No --nbsp-0892009050
Whatsapp Support: